How To Set The Parameters Of CNC Vertical Lathe?

CNC vertical lathe is an efficient and precise processing method that can meet the processing needs of many different materials. To achieve the best processing effect, reasonable parameters must be set.
1. Set processing speed
Processing speed is one of the most basic parameters of CNC vertical lathe. Its value depends on many factors such as the hardness of the processed material itself, the size of the processing tool, the processing depth, and the characteristics of the fluid. Generally speaking, the processing speed range is large and high-speed processing efficiency is high. However, it is necessary to pay attention to the appropriate adjustment of the speed when processing different materials.
2. Set the feed speed
Feed speed refers to the distance the workpiece moves within a certain period of time. The influencing factors of feed speed are similar to processing speed. Generally speaking, we should consider factors such as the size of the processing tool and the smoothness of the workpiece surface.
3. Select tool
When performing CNC vertical turning, it is very important to choose the appropriate tool. The selection needs to be based on comprehensive factors such as the strength, hardness, viscosity of the processing material and the required processing effect. For example, high-speed drills are suitable for drilling materials with higher hardness.
4. Set cutting depth
Cutting depth refers to the depth of penetration of the tool into the workpiece during each cutting process. The greater the depth, the greater the cutting force during processing, but the higher the processing efficiency. When setting the cutting depth, attention should also be paid to the maximum bearing capacity of the processed material to prevent material breakage caused by excessive depth.
5. Set outer diameter, inner diameter and distance
The outer diameter, inner diameter and distance are also very important parameters in CNC vertical lathes. These parameters are mainly set for the equipment and need to be adjusted according to the size of the processed material.
Through the above introduction, we understand that the most basic parameters of CNC vertical lathe need to be set to achieve the best processing effect. It should be noted that the settings of these parameters need to be continuously adjusted according to various factors such as the hardness and viscosity of the processing material and the smoothness of the workpiece surface, in order to achieve the most efficient and high-precision processing results. Therefore, CNC vertical lathe operators need to have certain practical experience and keen observation skills, and constantly make optimization adjustments to obtain the best processing experience.