CNC vertical lathe, as an efficient and precise machine tool, has been widely used in industrial production. Correct tool setting is the basis for ensuring machining accuracy. When operating a CNC vertical lathe, tool setting is an essential technology. So, how to set the tool of CNC vertical lathe? Today we will discuss this issue.
First of all, we need to make it clear that tool setting is a very important operation that requires corresponding knowledge and skills. If it is done accidentally and unprofessionally, it may affect the processing accuracy and even damage the equipment. Therefore, before performing tool setting, we should carefully read the operation manual of the CNC vertical lathe to understand the specific operating steps and precautions.
Secondly, understand the method of CNC vertical lathe tool setting. The main methods of tool setting include baffle method, tool setting block method, concentricity method and smooth edge method. The tool setting method used in CNC vertical lathes is generally completed using a tool setting block. The knife block method is simple and easy to use, and it is relatively easy for beginners to get started. You only need to fix the tool block on the spindle, adjust the distance between the block and the tool so that the difference is zero, and then process.
For the specific tool setting operation of CNC vertical lathe, we can also follow the following steps:
1. First, fix the tool on the tool holder, then connect the tool setting instrument to the spindle of the CNC vertical lathe, and set it up according to the operating instructions.
2. Turn on the switch of the tool setting instrument, adjust the position of the tool setting instrument, and place it under the tool.
3. Adjust and loosen the clamping nut of the tool block, clamp the tool block on the spindle of the CNC vertical lathe, tighten the nut, and fix the tool block.
4. Adjust the tool setting block to coincide with the center of the CNC vertical lathe spindle. Use an outer diameter gauge to measure the diameter of the tool setting block, and adjust the position of the tool setting block so that its center coincides with the center of the CNC vertical lathe spindle.
5. Gently touch the tool to the edge of the tool setting block. Turn on the tool setting instrument and measure the distance between the tool and the tool setting block.
6. Adjust the tool position of the CNC vertical lathe. According to the reading of the tool setting instrument, adjust the position of the CNC vertical lathe spindle so that the distance between it and the tool setting block is zero.
7. Carry out actual processing.
In short, how to set the tool of a CNC vertical lathe? First, you must master the method of tool setting, and then follow the operating steps and strictly abide by the precautions to ensure the accuracy of the tool setting. Only in this way can the machining accuracy and production efficiency of CNC vertical lathes be guaranteed and provide the greatest help for industrial production.
