As a supplier of Vertical Machining Centers, I often encounter customers who are looking for guidance on how to adjust the feed per tooth in these machines. This is a crucial aspect of machining operations, as it directly impacts the quality of the finished product, the efficiency of the machining process, and the lifespan of the cutting tools. In this blog post, I will share some insights and practical tips on how to adjust the feed per tooth in a Vertical Machining Center.


Understanding the Feed per Tooth
Before delving into the adjustment process, it's important to understand what the feed per tooth means. The feed per tooth (fz) is the distance that the cutting tool advances into the workpiece for each tooth of the cutter during one revolution. It is typically measured in millimeters per tooth (mm/tooth) or inches per tooth (in/tooth). The feed per tooth is a critical parameter in machining, as it affects the cutting forces, the surface finish of the workpiece, and the chip formation.
A higher feed per tooth can increase the material removal rate, which means that more material can be removed in a shorter amount of time. However, if the feed per tooth is too high, it can lead to excessive cutting forces, which can cause the cutting tool to wear out quickly, produce a poor surface finish, and even damage the workpiece. On the other hand, a lower feed per tooth can result in a better surface finish and less tool wear, but it will also reduce the material removal rate and increase the machining time.
Factors Affecting the Feed per Tooth
Several factors need to be considered when determining the appropriate feed per tooth for a specific machining operation. These factors include:
- Workpiece Material: Different materials have different cutting characteristics, such as hardness, toughness, and machinability. Harder materials generally require a lower feed per tooth to avoid excessive tool wear, while softer materials can tolerate a higher feed per tooth.
- Cutting Tool Material and Geometry: The type of cutting tool material (e.g., carbide, high-speed steel) and its geometry (e.g., number of teeth, rake angle, clearance angle) can also affect the feed per tooth. Tools with more teeth can generally handle a higher feed per tooth, while tools with a larger rake angle can reduce the cutting forces and allow for a higher feed per tooth.
- Machine Tool Capability: The power, rigidity, and spindle speed of the Vertical Machining Center also play a role in determining the feed per tooth. A more powerful and rigid machine can handle higher cutting forces and allow for a higher feed per tooth.
- Desired Surface Finish: If a high-quality surface finish is required, a lower feed per tooth may be necessary. This is because a lower feed per tooth results in smaller chips and less tool marks on the workpiece surface.
Steps to Adjust the Feed per Tooth
Once you have considered the above factors, you can follow these steps to adjust the feed per tooth in a Vertical Machining Center:
- Refer to the Cutting Tool Manufacturer's Recommendations: Most cutting tool manufacturers provide recommended feed per tooth values for their tools based on the workpiece material, cutting tool material, and machining operation. These recommendations can serve as a starting point for your adjustment.
- Calculate the Feed Rate: The feed rate (Vf) is the speed at which the cutting tool moves along the workpiece. It is calculated by multiplying the feed per tooth (fz) by the number of teeth on the cutter (z) and the spindle speed (n). The formula is: Vf = fz × z × n. For example, if the feed per tooth is 0.1 mm/tooth, the number of teeth on the cutter is 4, and the spindle speed is 1000 rpm, the feed rate would be: Vf = 0.1 × 4 × 1000 = 400 mm/min.
- Set the Feed Rate on the Machine Control: Once you have calculated the feed rate, you can set it on the machine control panel. Most modern Vertical Machining Centers have a digital control system that allows you to enter the feed rate directly.
- Conduct a Test Cut: After setting the feed rate, it's a good idea to conduct a test cut on a scrap piece of the same workpiece material. This will allow you to evaluate the cutting performance and make any necessary adjustments to the feed per tooth. During the test cut, pay attention to the cutting forces, the surface finish of the workpiece, and the chip formation. If the cutting forces are too high, the surface finish is poor, or the chips are too large, you may need to reduce the feed per tooth.
- Fine-Tune the Feed per Tooth: Based on the results of the test cut, you can fine-tune the feed per tooth to achieve the optimal balance between material removal rate, surface finish, and tool life. This may involve making small adjustments to the feed per tooth and repeating the test cut until you are satisfied with the results.
Additional Tips for Adjusting the Feed per Tooth
Here are some additional tips to help you adjust the feed per tooth effectively:
- Use a Feed and Speed Calculator: There are many online feed and speed calculators available that can help you determine the appropriate feed per tooth based on the workpiece material, cutting tool material, and machining operation. These calculators can save you time and provide more accurate results.
- Monitor the Cutting Process: During the machining process, it's important to monitor the cutting forces, the surface finish of the workpiece, and the chip formation. If you notice any changes in these parameters, it may indicate that the feed per tooth needs to be adjusted.
- Keep the Cutting Tools Sharp: Dull cutting tools can increase the cutting forces and reduce the surface finish of the workpiece. Make sure to keep your cutting tools sharp by regularly inspecting and replacing them when necessary.
- Consider the Machining Strategy: The machining strategy, such as roughing, finishing, or high-speed machining, can also affect the feed per tooth. For example, roughing operations typically require a higher feed per tooth to remove material quickly, while finishing operations require a lower feed per tooth to achieve a better surface finish.
Conclusion
Adjusting the feed per tooth in a Vertical Machining Center is a critical aspect of machining operations. By understanding the factors that affect the feed per tooth, following the steps outlined above, and using the additional tips provided, you can optimize the cutting performance, improve the surface finish of the workpiece, and extend the lifespan of the cutting tools.
If you are in the market for a Vertical Machining Center or need further assistance with adjusting the feed per tooth, please feel free to contact us. We are a leading supplier of High Rigidity And Stable Processing Vertical Machining Center, CNC Turning Lathe, and New automatic vertical CNC lathe VTC80A CNC lathe. Our team of experts is ready to help you find the right solution for your machining needs.
References
- Tooling U-SME. (n.d.). Feed and Speed Basics. Retrieved from https://www.toolingu.com/learning-library/feed-and-speed-basics
- Sandvik Coromant. (n.d.). Feed per Tooth. Retrieved from https://www.sandvik.coromant.com/en-us/knowledge/machining-calculators/feed-per-tooth
- Mazak. (n.d.). Machining Calculators. Retrieved from https://www.mazakusa.com/machining-calculators






